The Wholesale Multifunctional cooker motor factory believes that if the induction cooker fan motor does not rotate and the exhaust is not smooth, it is easy to cause failure. In order to avoid such a situation, the cause should be identified as soon as possible and an appropriate solution should be found. Why doesn't the induction cooker fan motor turn? What should I do if the fan motor of the induction cooker does not turn? The following are two cases, the treatment methods are different, let's take a look with the Wholesale Multifunctional cooker motor factory:

　　1. The fan motor of the induction cooker does not turn after turning on

　　The Wholesale Multifunctional cooker motor factory feels that after inspection, if the motor is found to be damaged and the fan does not rotate, consider replacing the motor. If the problem cannot be solved after replacing the motor, it may be caused by a problem with the low-voltage control board. It is necessary to measure the secondary voltage of the power transformer. Usually, the voltages of 18V, 16V, and 8.5V are normal. If it is lower than these values, it indicates that the power transformer is faulty and needs to be replaced.

　　2. The fan motor of the induction cooker does not rotate soon after starting the machine

　　The Wholesale Multifunctional cooker motor factory recommends that in this case, the motor can be tested. If the motor is in good condition and the control triode is also good, continue to measure the DC voltage of each group, and replace the low-voltage control board. If it still does not work, use the belt glow and replace the panel display board. If the fan motor returns to normal operation, it is obvious that the fault is caused by the panel display. caused by the circuit board. Check one by one and look at the components on the circuit board of the display board to find out the faulty part and fix it as soon as possible.