Brushless DC gear motors can also be called "DC brushless motors, brushless motors, high-power brushless motors". Its characteristics are as follows:

1. The relatively high-end high-power miniature DC brushless external rotor motor on the market.

2. The characteristic of the motor is that the rotor magnets are distributed on the inner wall of the motor housing, and the stator coil is located in the center of the motor.

3. The external feature of the motor is that the output end cover is fixed, the motor shell rotates, and there are 3 wires outgoing, and there is no Hall.

8MM Hardware Gear Box

4. In terms of use:

A. It must be used with a dedicated brushless drive, and the motor is a three-phase motor.

B. The steering and speed of the motor are adjusted by brushless actuators or external signals.

5. The motor adopts high performance neodymium magnet multi-slot winding technology to obtain good comprehensive performance.

6. The motor has superior performance, with an efficiency of over 75%.

7. The motor has no carbon brush wear and has a long service life, generally between 10,000 and 10,000 working hours.

8. The outer rotor structure of the motor has large rotor torque, good heat dissipation, and high power can be obtained.

Application areas of brushless motors: The remarkable characteristics of brushless motors are strong explosive power, fast speed, and KV value. It is especially important for some occasions that require speed and explosion, such as model airplane motors and edge grinding machines used in small aircraft. Matching with reducer: Because the outer rotor brushless motor rotates very fast, it is generally matched with a small reducer.