Customized Evaporator Motor Factory believes that the evaporator is one of the most commonly used wastewater evaporators in the process industry. The evaporator is to pass the secondary steam vaporized by the previous effect evaporator into the heating chamber of the latter effect evaporator as the latter effect evaporator. The multi-effect evaporation makes full use of the latent heat of vaporization of the secondary steam of each effect, and is a relatively energy-saving evaporation operation.

　　The customized evaporator motor factory found that the evaporator is used in the liquid syrup concentration process of the corn chemical plant. The raw steam is passed into the chemical wastewater evaporator to heat the liquid syrup, and the water in the liquid syrup is heated and evaporated to achieve the purpose of concentration.

　　The structure and characteristics of the evaporator in the evaporator motor factory are customized, and the working principle of the chemical wastewater evaporator and its application in chemical enterprises are introduced. In the wastewater concentration process, the tubular falling film evaporator is used, and the wastewater flows in the tube. The shell side condenses and releases heat.

　　The custom-made evaporator motor factory found that in the evaporator, when the refrigerant liquid on the refrigerant side is mixed with lubricating oil, the oil is very dry at low temperature, and it is easy to adhere to the heat transfer surface to form an oil film and is not easy to discharge, thereby increasing the efficiency. Large heat transfer thermal resistance; at the same time, the formation of oil film will also prevent the refrigerant liquid from wetting the heat transfer surface, reducing the heat transfer efficiency, and in severe cases, the refrigerant will not absorb external heat at all and lose its cooling effect.